Home - Return to Previous Page

Quick Snow-Away™ Mini - Mini Hydraulic Snowblower

Your Fitment

Product Information

  1. Heavy-Duty gear box drives auger
  2. No-Freeze-Up chute design seals out snow and freezing slush (comes standard)
  3. Auger is protected by shear pin
  4. High-Carbon steel cutting edge comes standard

Description


A quality built snowblower that really works! The Mini Hydraulic Snowblower meets the tough demands of your mini skid steer throwing snow up to 25’ while clearing paths down to the ground. Featuring a No-Freeze-Up chute design! Two important factors must be considered when purchasing a snowblower – gallons per minute and hydraulic pressure (psi) are very important to the ultimate performance and your satisfaction. Every snowblower is custom engineered to provide maximum performance for each mini skid steer make and model.
  • Replaceable bolt-on high-carbon steel cutting edge
  • Hydraulic control valve with electric solenoid controls all chute functions
Model 1600 2020 48” 2020 55” 2020 61”
Part Number 900455 901443 901445 901447
Stage 2 2 2 2
Width of Cut 53” 48” 55” 61”
Cutting Height 22” 29” 29” 29”
Cutting Edge 3/8” x 3” bolt-on 5/8” x 6” bolt-on 5/8” x 6” bolt-on 5/8” x 6” bolt-on
Auger Diameter 12” open flight 16” open flight 16” open flight 16” open flight
Fan Diameter 16” 4-blade 20” 4-blade 20” 4-blade 20” 4-blade
Chute Rotation Hydraulic 210° Hydraulic 270° Hydraulic 270° Hydraulic 270°
Pressure Relief Fan Only Auger Auger Auger
Casting Distance Up to 25’ Up to 40’ Up to 40’ Up to 40’
Approimate Shipping Weight 418 lb. 652 lb. 700 lb. 725 lb.
Mounting Plate Mini Skid Steer Mini Skid Steer Mini Skid Steer Mini Skid Steer
Hoses Included Included Included Included
Hydraulic Flow 10-14 GPM 11-16 GPM 11-16 GPM 11-16 GPM
Operating Pressure 2,500-3,500 psi 2,500-3,500 psi 2,500-3,500 psi 2,500-3,500 psi
Skid Shoes Standard Standard Standard Standard
Mounting Kit Configurations ASV/Terex (RC/PT30)
Bobcat (MT-52/55, 463/S70)
Toro / Vermeer / Boxer / Ditch Witch / Ramrod / Kanga / Cormidi
Universal Mounting Plate (up to 1,000 lb. ROC and within rated flow)
Options
Serrated Auger N/A
Hardened Skid Shoes N/A
Urethane Skid Shoes N/A
Urethane Cutting Edge
Rubber Cutting Edge N/A      
Toggle Control Harness N/A N/A N/A
Pistol Grip Control Harness N/A
Loader Specific Wire Harness
Factory Installed Couplers