Quick Snow-Away™ 2420 - Hydraulic Snowblower 2420 Series

A quality built snow blower that really works! Throw snow up to 40’ while clearing paths down to the ground. Features a no freeze-up chute design! Two important factors must be considered when purchasing a snowblower for your skid steer loader – gallons per minute and hydraulic pressure (psi) are very important to the ultimate performance and your satisfaction. Discuss these factors with your product specialist when purchasing. We custom engineer every snowblower to provide maximum performance for your make and model.

• Standard Single Ribboned Auger flighting on the 2020 and 2420 series, is extra thick to increase lifespan in abrasive environments. Narrower flighting pitch makes the structure stiffer to withstand impacts better and move more snow to the center where the fan is located allowing our snowblower to blow more snow than our competitors.
• Replaceable bolt-on high-carbon steel cutting edge.
• Hydraulic relief – no shear pins.
• Hydraulic control valve with electric solenoid controls all chute functions with built-in pressure relief system eliminating the need for shear pins.
• Our adjustable heavy-duty skid shoes allow the operator to make quick and easy height adjustments. (optional)
• Throws snow up to 40'.
• Optional 16” Serrated Auger on the 2020 Series, or 18” on the 2420 is Optional as well, Standard on the 2420XL Series. Our unique high capacity fan and motor system requires a large 16” or 18” auger design that can handle more snow material. Our serrated auger design cuts through hard-packed snow and ice. This flighting completely covers the middle of the auger so there isn’t a “dead spot”.
• No freeze-up chute design seals out snow and freezing slush.
• The fan is mounted on a hydraulic motor eliminating the need for a gear box.
• No Chains, sprockets or PTO shafts. Direct-drive hydraulic auger eliminates problematic chain drive.
• Pressure relief valve protects the auger which replaces the need for shear pins.
• Heavy-Duty Serrated Side Plates:  Our unique heavy-duty serrated side plate design made of 7 gauge steel on the 2020 and 1/4” on the 2420/XL. The snowblower with the serrated side plates is able to cut into hard-packed drifted snow or hard-packed piles of snow. This allows the auger to grind away at the pile loosening snow to feed to the fan.

Model	2420 – 55”	2420 – 61”	2420 – 73”	2420 – 79”	2420 – 85”
Part Number	901454	901455	901456	901457	901458
Stage	2	2	2	2	2
Width of Cut	61”	61”	73”	79”	85”
Cutting Height	36”	36”	36”	36”	36”
Cutting Edge	5/8” x 6” bolt-on	5/8” x 6” bolt-on	5/8” x 6” bolt-on	5/8” x 6” bolt-on	5/8” x 6” bolt-on
Auger Diameter	18” open flight	18” open flight	18” open flight	18” open flight	18” open flight
Fan Diameter	24” 4-blade	24” 4-blade	24” 4-blade	24” 4-blade	24” 4-blade
Chute Rotation	Hydraulic 270°	Hydraulic 270°	Hydraulic 270°	Hydraulic 270°	Hydraulic 270°
Pressure Relief	Auger	Auger	Auger	Auger	Auger
Casting Distance	Up to 40’	Up to 40’	Up to 40’	Up to 40’	Up to 40’
Shipping Weight	865 lb.	900 lb.	975 lb.	1,010 lb.	1,040 lb.
Mounting Plate	Universal	Universal	Universal	Universal	Universal
Hoses	Included	Included	Included	Included	Included
Hydraulic Flow Requirement	24-38 GPM	24-38 GPM	24-38 GPM	24-38 GPM	24-38 GPM
Operating Pressure	2,500-3,500 psi	2,500-3,500 psi	2,500-3,500 psi	2,500-3,500 psi	2,500-3,500 psi
Standard Skid Shoes	Standard	Standard	Standard	Standard	Standard
Options
Serrated Auger
Hardened Skid Shoes
Urethane Skid Shoes
Pistol Grip Control Harness
Loader Specific Wire Harness
High Flow Couplers (Installed)
Urethane Cutting Edge
Rubber Cutting Edge
Pistol Grip Control
Factory Installed Couplers